Making Your Own Survival Knife – Part 1

I have always been fascinated with creating things, whether its writing, graphic design, YouTube or Photography, i love creating things myself. There is a certain feeling of accomplishment when you can make something beautiful out of nothing. I have always loved knives, so I decided it was time for me to learn how to make one myself. I started with a 5/8 inch thick steel sheet, and cut it into what I thought would be a good block for my knife template.

From there, I grabbed my grinder and just started grinding away steel until I had a shape that roughly resembled what I wanted the knife to look like.

OLYMPUS DIGITAL CAMERA

After a lot of filing to get the excess metal shavings off of the corners, I proceeded to grind in the bevels. Of course I don’t have access to a big belt sander like most knife makers do, so I got my hands on the next best thing. A hand held belt sander. The problem with this is its hard to make any kind of rig to control the angle of the bevel. So I had to eyeball the angle, fortunately it came out close, but there were differing angles as you went up the blade, it really didn’t look too bad but it wouldn’t have passed quality control.

None of those imperfections really mattered however, because the next step was heat treating the knife to harden the steel. A plethora of YouTube videos made it look much easier than it was. First I tried using a large propane torch and shooting the flame into a brick where the knife sat, this did not even get the metal close to hot enough. So I decided to go a more traditional route and cover the metal in charcoal. I spent about 20 minutes heating up a mound of charcoal until the metal was red hot. ( I didn’t test it with a magnet, my first mistake).

OLYMPUS DIGITAL CAMERA

I pulled it out of the coals with my tong and proceeded to dip it into peanut oil. Unfortunately it seemed that the charcoal had stuck to the metal, and through the quenching had fused into the metal. This not only bent and ate into my steel, warping my knife, but it fused a mount of charcoal remains onto the metal, which was NOT easy to file off. Needless to say, the end product looked like this. Back to the drawing table…..

Realizing What Is Important In Life…

Last weekend I spent some time at Ludington State Park to relax and spend some time away from the rest of the world. Truth is, I have been struggling with some relationship issues for the last month and I needed to get out of town to spend some time with some good friends and reflect on my life.

If you are like me, you struggle with letting go of things whether its stress, relationships or just problems in general. The only way I can really let go of things is to just spend time away from my phone and computer, sever contact with the outside world and just spend time with good friends and once again realizing why I should appreciate my life. I let the problems of my life halt me in fear so much, it stops me from being happy. I haven’t been really, truly happy for the last 10 months, and hopefully this was the start of my healing process.

Sitting there, by the fire having good conversation while surrounded by people who love me and care about me really helped me realize what I should be focusing on in this life. Not fear, not the stresses of my job, not damaging relationships, but family and my own personal emotional health.

If you haven’t been truly happy with your life for a while, I encourage you to focus on whats truly important in your life and let go of those things that constantly drain you emotionally. It is a hard process, I am still going through it, but it will be worth it in the end.

 

OLYMPUS DIGITAL CAMERA

DIY Fire-starter For Your Next Adventure!

One of the most important parts of camping is having a warm fire to cook food on and warm up by, and if you are like me, sometimes you have a hard time actually starting the fire. While there are plenty of products you can buy that will help make your next fire much easier to get going, there are also a myriad of great DIY methods. One of the best ways, is Char Cloth, which is cheap and very easy to make!

Having a flint and stone out in the woods can be a huge start to getting a fire started, but from my past experiences, sparks can be a  fickle way of starting a fire, so its important to have something that will light on fire at the smallest spark. Thats where Char Cloth comes in. The Art of Manliness says that “Char cloth is created through a process of pyrolysis, which Wikipedia tells us is the ‘thermochemical decomposition of organic material at elevated temperature in the absence of oxygen.’ Basically, char cloth is created by combusting an organic material in a way that releases its gasses without burning it up completely”. This makes a material that will combust at the slightest spark, making it the ideal method of starting a fire in a survival situation.

What you need: 

  • Altoids mint tin (or any enclosed tin)
  • Small pieces of cloth
  • An open flame

OLYMPUS DIGITAL CAMERA

 

The first step is to place the cut up pieces of cloth into the tin can as flat as you can ( I placed them in all clumped up and they didn’t char as evenly as they should). Next poke a small hole into the top of the can for the gasses to be released and place into an open flame.

OLYMPUS DIGITAL CAMERA

As you can see, I messed up my first batch and had to switch tins, so don’t be scared to mess up, you can always retry. The process of pyrolysis can take anywhere from 5 to 15 minutes, but generally you just want to wait until you cant see any gas coming out of the vent anymore. Once the gas is not coming out, that means the cloth is ready.

OLYMPUS DIGITAL CAMERA

Open up the can once it is cooled down and your cloth should be completely black and feel more brittle than it did before. Test it out by using a flint and steel to spark it, it should light up very easily.

OLYMPUS DIGITAL CAMERA

Once you have perfected your process, repeat as necessary. Make sure you bring with you on any camping trips for the next time you might have to make a fire and have no other methods available to you.

Know of a better way to make it? Comment below!

 

Follow me on Instagram: https://www.instagram.com/garrettnear/

Like This Post!

Follow The Blog!

 

Sources:

http://www.artofmanliness.com/2015/02/10/the-ultimate-firestarter-how-to-make-char-cloth/

 

The piece my paper wouldn’t publish…

I actually work as a contributing writer to my local paper and posed a possible HONY-esque column for the paper. As i submitted my first piece however, they never replied, and I have since not been able to get them to publish it. Today I asked the subject’s permission to post it here. Below is a portion of my interview with them:

OLYMPUS DIGITAL CAMERA

“I’m a first-generation immigrant, my parents are undocumented themselves. No one has gone to the bottom from losing everything more than my father. He came here, opened a business in Chicago, then the business failed. So, we moved to Michigan where he opened a business in Fenville. After 30 years, the economic crisis hit Michigan, and his business went with it. After that we moved to Holland with my ex-husband, that failed and now we are in Shelby. How much is that of the American dream? Where you just keep trying and trying and trying again, never giving up. That’s how I see it.”

-Shelby Michigan